![]() If your count is quite low (let’s say 20), and it stays the same after using the drive, restarting the computer, etc., your drive might be in good shape. How quickly this count rises is the major indicator of how probable your drive will fail. Pending sectors are a red flag that your drive could malfunction or have issues. ![]() If the sector is bad, it will turn into a reallocated sector (ID 05), resulting in a decrease in the pending count but an increase in the reallocated count. The drive’s ability to later successfully read data from the sector will determine whether or not the pending sector count increases or decreases. In essence, your hard drive is thinking about remapping a sector to one of the spare sectors because it has problems reading that sector of the drive. Your drive’s unstable sectors are waiting to be remapped (reallocated) to free up space, as indicated by your current pending sector count. Current Pending Sector Count in CrystalDiskInfo C5:ĬrystalDiskInfo will display a Caution warning if the C5 – Current Pending Sector Count column contains a value larger than 0. Let’s delve into these and learn precisely what each of the 3 typical faults entails, as they are what will cause CrystalDiskInfo to provide a warning about the health of your hard drive. By doing this, you will receive the actual number for each column as opposed to machine-readable gibberish.Ĭommon CrystalDiskInfo Data Points That Should Give You Caution. To get a decimal output for the Raw Values column, use CrystalDiskInfo’sCrystalDiskInfo’s Function -> Advanced Features -> Raw Values and set it to 10 D.E.C. You can modify this by going to: It can occasionally show by default as a hexadecimal value (letters and digits), which is not very helpful unless you can translate Hex to Decimals in your brain. ![]() If you’re not a robot, you can alter this by going to. attribute is listed in the Raw Values column. The number of mistakes your drive detects for that S.M.A.R.T. Only pay attention to the Raw Values column you don’t want to be looking at the Current or Worst columns. It’sIt’s improbable that you have 100 reallocated/pending/uncorrectable sectors instead, CrystalDiskInfo’sCrystalDiskInfo’s column you’re looking at is probably the incorrect one. What should you do if you recently opened CrystalDiskInfo and it displayed an amber Caution warning next to one of your hard drives of your pc? Is your hard disc in danger of failing? Do you immediately require a new hard drive? Is it that awful, and am I still allowed to use the drive? I need to correct a common error I’ve seen online before we dig into the significance of each S.M.A.R.T. CrystalDiskInfo Showing’ Caution”: Three Things to Check Immediately: If you wish to keep using a drive that has these issues, you need to keep a close eye on it every day to ensure the counts in the Raw Values column are not dramatically increasing. Large numbers of these mistakes and a significant rise in these errors over a short period are the primary signs of a drive slowly deteriorating. ![]() A recent backup of your data should always be available, and if you ever receive a warning, you should take it as a cue to make an even more current backup. Many drives with Caution or Bad health warnings have survived for years, whereas drives with Good signs have perished within an hour. It’s not always an obvious sign that your drive may fail if it displays a Caution or Bad health warning. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |